Hello Everyone,
Last month I posted about the sound problem with my Y6B - I now have another problem.
When I ran my engine after making some track changes I noticed that the bell would ring on start up and often upon every change of direction or move into neutral. Sometimes with the bell ringing I cant activate the whistle although this is fine once I shut the bell off.
I have checked for damaged brokenm wires, shorts and cleaned all the rollers. I can't seem to do a re-set to dfactory settings either as the bell ringing gets in the way!
I am using a CW80 but this engine and all my other MTh have always worked fine with it and I have re-set this engine before with the same controller. I should also mention the Y6b is an early PS2 with 5v boards
Am I missing anything? I run conventional but a friend has DCS so I could try a reset there.
Any ideas guys?
CHEERS MIKE
