I have never done it but I am considering buying a nice MTH 260 E PS2.0 NYC tinplate locomotive that has freight sounds and I would like to swipe out and replace with passenger sounds as I want to use it to pull some NYC tinplate passenger cars I was able to get.. Is this hard to do. Appreciate any advice before I start. Al
allan.bisback@gmail.com
Replies sorted oldest to newest
Al,
For a complete discussion regarding changing DCS engine sound files, refer to pages 143-147 in The DCS Companion 3rd Edition or pages 156-161 in The DCS WiFi Companion 1st Edition.
 | This and a whole lot more about DCS is all in MTH’s “The DCS Companion 3rd Edition!" This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store! |
 | This and a whole lot more about DCS WiFi is all in MTH’s “The DCS WiFi Companion 1st Edition!" Get the free TMCC & Legacy Addendum here! |
Al, that is done every day. I am a passenger guy and any freight locomotive I have gets a passenger file. You just put in the file you want and it overwrites the existing file.
Thanks Barry and Marty. I will review DCS book.
Access to this requires an OGR Forum Supporting Membership
