Skip to main content

I am considering one of these pre-fabbed kits from China.
1 set crossing signals + automatic reed switch controller sound effect & flash

Anybody install one of these? Any thoughts or recommendations?

My newly rebuilt PRR 671 (1948 version) is up and running in time for Christmas.

Attachments

Videos (1)
PRR 671 steam whistle
Original Post

Replies sorted oldest to newest

In the FWIW category, these WeHonest signals have been operating on a display shelf 15/7 for 2 1/2 years.  They have worked perfectly.

One note, the board would not hold the brightness setting once power was removed.  With a help request here on the forum, @stan2004 suggested changing the 0 ohm resistor for a 1k ohm at that location.  Worked exactly as he said. 👍

7078AEF2-67D3-4C57-9DBB-16F6328F2B5F

66BB5E4E-98D3-4B89-846F-14831EFB2EE0

Attachments

Images (2)
  • 66BB5E4E-98D3-4B89-846F-14831EFB2EE0
  • 7078AEF2-67D3-4C57-9DBB-16F6328F2B5F
Videos (1)
IMG_9294
Last edited by TedW

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×