Run 2 MTH SD40-2 on same track?

Are you using a full DCS system or DCS explorer. If using full DCS, factory reset both engines and re-add them to your remote. Let us know the results.

Hey Matt,

   Yes I have the full DCS, TUI, Wifi system. Everything up to date. I have tried to delete the engines from my iphone APP Active & inactive list and re-add them, but same problem. I have NOT done a factory reset on engines, Will try, Thanks

Kenny, It sounds like these engine have the same address but as you said earlier with U30C on the track they work like you want... I'm with the engine reset on this one. Try that and see if resolves your issue...

If the engine reset doesn't work, you might try renaming one of them. I had  a similar problem with two premier CSX engines.

I agree with H1000. I think both SD40s have the same address number. Did you buy one of them used? That could explain the situation. I would go in and change the address number for at least one of them. When you do this, have only ONE on the track!

Chris

LVHR

Thank you everyone for the help & insights you gave. I did do the engine reset on both SD40-2 and that fixed the problem!

Thanks again, Kenny