I have a Z4000 and I would like to be able to run conventional from the Z4000 , DCS from DCS controller and TMCC from its controller. Need to know how this all should be wired. I thought of using toggle switches not sure if this would work.
Thank you in advance
Replies sorted oldest to newest
Jimmy, just follow Gregg's, Jeff's, and John's responses on your previous post: Hooking up Z4000 - DCS - TMCC
Also, once you're certain you want to be involved with DCS I suggest then at some point you get Barry Broskowitz's “The DCS Companion 3rd Edition!" It has all the information about DCS you'll ever want and need to know. A valued resource if running the DCS system.
 | This and a whole lot more is all in “The DCS Companion 3rd Edition!" This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at OGR’s web store! |
When running conventional I do not want to use the TIU at all. I also own the book.
Jimmy,
When running conventional I do not want to use the TIU at all.
I'm curious why you would want to bypass the TIU?
Do the TIU's burn out over time ?
Jimmy,
Do the TIU's burn out over time ?
No more so than any other electronic device, particularly if the TIU isn't abused. Some people have problems, some do not. That's why there are warranties.
Access to this requires an OGR Forum Supporting Membership
