Put my Lionel sd70ace (1:64) on the track and turned on the MRC DCC. All functions work. Startup, volume, shutdown, whatever. But it won't move. forward or backwards.
Is it broken or do I need to do something extra with the DCC remote to get it going?
Replies sorted oldest to newest
Martin
i have a bunch of them but I run them with Legacy, however there are a few active guys on this board that have them and run them with DCC so you should get an answer.
Ben
Mine will lose its mind occasionally. I just start over by setting CV8=8 (reset) and then setting the address again. Also, make sure you are in "Run" mode"
Mine will lose its mind occasionally. I just start over by setting CV8=8 (reset) and then setting the address again. Also, make sure you are in "Run" mode"
Access to this requires an OGR Forum Supporting Membership
