Just finishing rebuilding layout and want to install sensor track. Any information on how to install/ connect Lionel sensor track in the Base 3 environment would be helpful. All information I have referred only to base 1 and 2.
Original Post
Replies sorted oldest to newest
The sensor track description has been updated on the Lionel Power and Control website, the manual has not. The Base 3 has an LCS power supply built in along with three PDI outputs. Just plug the PDI cable from the Sensor Track directly into one of the Base 3 PDI outputs or plug it into another LCS component that is connected to the Base 3. The 6-81499 power supply and DB-9 cable is not used with the Base 3.
Here's the section on LCS PDI
