Skip to main content

Probably someone who understands how the SHS locomotives respond to the LocoMatic controller  and how the "Flyonel" Railsounds boxcar work can explain this.  When I couple a railsound boxcar immediately behind an SHS Consolidation, the locomotive will not respond to the commands of the LocoMatic Control box but the Railsounds boxcar responds to all commands.  However, if I move the Railsounds boxcar three cars behind the locomotive, the Locomotive responds to all the commands from the LocoMatic Control Box and the Railsounds boxcar responds to all commands . 

Does anyone know what is going on and why?

LittleTommy 

Original Post

Replies sorted oldest to newest

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×