Does anyone have the part number for a replcement heating element? I need to replace the elements on my Premier 20-3045 Dreyfuss Hudson.
Thanks
John
Original Post
Replies sorted oldest to newest
hi are you sure you gave the right number does not come up on mth web sight!?
Alan
hi are you sure the element is bad or maybe a board problem? is it a ps2 volt 8.4 volt board or ps2 3 volt board? Alan
Alan Mancus posted:hi are you sure you gave the right number does not come up on mth web sight!?
It is right here. The exploded view is here. The entire smoke unit is shown here. I believe the element is AI-0000018 (15 OHM) shown here. Packs of 10 are also available from MTH.
Edited 09/07/2024 to remove link.
Thanks guys. I searched high and low and had no luck finding the part number. My 20-3045 Hudson has a 5-volt board. One of the elements is toast--the coil is split in half.
John
John, replace them both while you're in there.
Will do, John--thanks. This will definitely put my soldering "skills" to the test.
John, did you loose my phone number? I have that number off the top of my head. I have about 60 in my smoke unit box if you are in my neighborhood.
I know Brasseur and others rate the AI-0000018 at 15 ohms. They are 16 ohms and not 15.
John, at the end of your 20-XXXX-1 you need to put the dash 1 to find it anywhere.
Marty Fitzhenry posted:John, did you loose my phone number? I have that number off the top of my head. I have about 60 in my smoke unit box if you are in my neighborhood.
I know Brasseur and others rate the AI-0000018 at 15 ohms. They are 16 ohms and not 15.
John, at the end of your 20-XXXX-1 you need to put the dash 1 to find it anywhere.
No way, Marty, didn't lose your number, but I knew you had just arrived back from FL and you were very tired, so I didn't want to bug you. I bought the elements from Brasseur but haven't had a chance to change them yet. Hopefully this week. Thanks Marty, for all your help.
John
John, just getting caught up.
Marty
