Skip to main content

Replies sorted oldest to newest

Such a first class assembly of a wonderful train terminal. I continue to think of architectural design as truly an engineered art. Thanks Alan for sharing the display of another great structure for any model train layout in our great land.

Sharing with you again this morning some of my most recent scenic work for the layout.

Enjoy these first days of June guys.😀

Attachments

Images (2)
  • IMG_6710: Firebrick kiln and new warehouse
  • IMG_6711: Firebrick warehouse for Harbison-Walker

Beautiful terminal Alan! @Anthony K, great house model, and your porch is wonderfully done! Should look good anywhere on your layout.

I don’t tend to get a lot done over spring and summer. Too much going on. Mostly just run my trains. But, I am trying to finish up my last project of the winter. A completely tinkercad designed and 3D printed refinery. This is the first scratch building that I have made entirely by 3D printed components. It has been a challenge and fun. I am finishing hiding the wiring of the lights and smoke units in various pipes etc. I have placed a few figures. Likely more to come. I have weathered the structures as well. Might have it on the layout this evening??? Hope everyone has a good week! Thanks as always for sharing!

MikeIMG_1398IMG_1397IMG_139608D70CA2-B5CC-4579-93C1-CE33341F5AEBIMG_1417IMG_1419IMG_1420IMG_1423IMG_1422IMG_1421

Attachments

Images (10)
  • IMG_1398
  • IMG_1397
  • IMG_1396
  • 08D70CA2-B5CC-4579-93C1-CE33341F5AEB
  • IMG_1417
  • IMG_1419
  • IMG_1420
  • IMG_1423
  • IMG_1422
  • IMG_1421
@LT1Poncho posted:

Beautiful terminal Alan! @Anthony K, great house model, and your porch is wonderfully done! Should look good anywhere on your layout.

I don’t tend to get a lot done over spring and summer. Too much going on. Mostly just run my trains. But, I am trying to finish up my last project of the winter. A completely tinkercad designed and 3D printed refinery. This is the first scratch building that I have made entirely by 3D printed components. It has been a challenge and fun. I am finishing hiding the wiring of the lights and smoke units in various pipes etc. I have placed a few figures. Likely more to come. I have weathered the structures as well. Might have it on the layout this evening??? Hope everyone has a good week! Thanks as always for sharing!

MikeIMG_1398IMG_1397IMG_139608D70CA2-B5CC-4579-93C1-CE33341F5AEBIMG_1417IMG_1419IMG_1420IMG_1423IMG_1422IMG_1421

Mike this is fabulous!  That's an awful lot of 3D designing and printing.  The weathering is spot on.  Masterful work sir.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×