This is a question regarding the BLACK TIU channel input and output terminals. For each channel is the BLACK input and output terminals internally connected or is there some electronics/fuse in between the terminals two terminals ? The concern is if I connect a lamp to the BLACK output is it the same as connecting it to the BLACK input. Obviously that's not true for the RED terminals.
Replies sorted oldest to newest
For Fixed one and two both red and black are pass through connected. There is a fuse involved. But what goes in comes out.
For VAR 1 and 2 there also is fuse but input goes through FETs to control voltage before it gets to output. I have to check if that is just Red. G
Thanks G - It's a variable channel I'm discussing. I have all my TIU output common lines (BLACK terminals) tied together. I want to use the input on one of the variable channels to power some lights. With my commons tied together that would mean the input and output BLACK terminals on the variable channel would be tied together. If the input and output BLACK terminals are not tied together internally there is a reason and I wouldn't want to cause a problem by connecting the BLACK input and output.
Access to this requires an OGR Forum Supporting Membership
