Skip to main content

3 replies

TIU - WIU - App

N nsp154OGR Forum Member SUPPORTING MEMBER

I have a Rev L TIU WIU -App set up. The app is the latest version, I have both Premium upgrades.

I have 15 MTH Engines loaded (one at a time) plus one TMCC . I have a couple of issues which pop- up every time I use the app. Those steam engines with Quillable Whistle and Quillable steaming whistle, the whistle features have to be reset every time I have a session. The TMCC has to be re-entered every session as well (it is in the inactive file) The TMCC always programs into the app and operates correctly - but again after each session it reverts back to inactive where it stays until deleted & re programmed. I should add, the WIU is in the MTH mode

Thanks

Last edited by nsp154
Original Post

Replies sorted oldest to newest

H H1000OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I always double-tap the whistle rope (the color changes from white to purple) to turn on the quilling whistle. It's pretty easy to do from the main engine control screen.  Odd to see the TMCC engine stay inactive, mine always stays active even if the track power is off. The app cannot tell if a TMCC engine is active or not, it can only assume.

Add Reply

Views: 69
Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
CONTACT US
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×