Skip to main content

To those of you that knew Barry only via this forum, you were witnessing only the tip of the iceberg of someone that would truly take the time to do "whatever it took" to be of assistance to a fellow "lover of this great hobby".  

I count myself as blessed that Jim Barrett referred me to Barry as a resource for DCS trouble-shooting, and will be eternally thankful for ALL of the time that Barry spent with me, via more phone calls and for MORE HOURS than I can count.   Barry's desire was that we understood what he knew - the mark of a learned teacher . . .  AND - that because we "figured things out", we could have a magnificent time with our beloved model railroad(s).

To his family, and close friends, I pray that your hearts will be filled with great memories of this incredible human being.   Respectfully, with the deepest of condolences . . . 

Capt. Timothy LeVan

This loss is beyond words.   Cora and Barry's family will be in my prayers.

I didn't meet Barry in person until after his stroke in the Orange Hall at York, and it always seemed that we were blessed to still have him with us.  I have a LOT of fond memories of the time we spent together at York and here on the forum.  His friendship will be missed.

Years ago, a friend was suffering from ALS, but trying to build a layout with DCS. Barry made himself available by phone when ever help was needed. The year ALS kept my friend from getting to York, and the Wednesday night gathering, Barry called him at home from the gathering so he could be there, too. Always there, helping others is how I'll remember him.

RIP, Barry.

Barry has no doubt made a wonderful impact on our hobby and in particular this group.  No words can express how important he was to our community but all one has to do is read through the pages of this thread to see his impact.  Barry has had such a positive impact.

Barry was a friend that I've met through this forum.  As a Legacy guy, who has DCS, I always followed Barry's posts with great interest.  We would often discuss or respective upcoming Users Meetings either via email or when we would run into each other at York.  While I certainly didn't know him as well as some, I do value his friendship and his contributions to our community.

To Barry's family, especially Cora, my sincere condolences.  To Barry's close friends here on the forum, remember that Barry has given us a precious gift of time and knowledge.  His legacy will be all the folks that benefited from his knowledge but more importantly his willingness to share.  I will certainly miss him.

On behalf of myself and the Legacy Users group Godspeed Barry.  Until we meet again my friend.

Last edited by MartyE

I have been a follower on this forum for a number of years.  And, only a few of you will recognize me.  I have been Barry's friend for more than 35 years.  We met many years ago when he ran a bulletin board and instantly became friends because we had so many common interests.  At that time, we both had high profile positions in the Information Technology sector.  Each of us was interested in the very early 8-bit home computers (which were state of the art in those days).  I always thought I was really good with a soldering iron.  Once I met Barry, I never thought that again.  Barry was the most talented person I ever met when it came to printed circuit boards.  He and I spent many hours updating our computers and early disk drives.

It didn't take Barry long to get me hooked on trains.  We spent many hours attending local train shows.  Often driving as far as Jacksonville (almost 2 hours each way).  But, spending time with Barry was always time well spent.  He was one of those rare individuals who honestly knew how to be a friend.  I always knew if I needed something, I could count on Barry to be there for me.  And, when Barry had his heart incident at York a number of years ago, I tried my best to be there for him as he worked so hard to recover.  Many of you don't know this.  But, Barry struggled to learn to write his name quickly.  If it was his turn to pick up the lunch check, he would ask me to "time him" to see how long it took him to sign the check.  He kept track of these times so he could track his progress.

We often met for lunch and, again, the time I was able to spend with Barry was time well spent.  We disagreed on some political issues.  But, we always respected each other's opinion and kept an open mind when listening.  The last time I had lunch with Barry was just a couple of weeks ago.  He was painfully thin and walked with increasing hesitation.  I expressed concern for my friend.  He told me not to worry and quickly changed the subject asking me how my wife was doing as she recovered from a recent fall in our home.

Barry's life was an example all of us can follow.  He was unselfish in his willingness to share his knowledge and help others.  I can remember the excitement in his voice as he told me about a train layout he was going to install at a local Ronald McDonald house where families of pediatric cancer patients could stay while their children received treatment.  Giving back to the community was something that was always important to Barry.

Rest in peace, my friend.  I will miss being able to spend time with you.

Last edited by Craig Kaplan

What a terrible way to start the week.  I woke up this morning with a text message, from a dear friend, informing me of this loss.  I immediately thought of Barry's family and prayed to our Heavenly Father for their comfort.  God is good and faithful to provide his tender love during time of sorrow.  God Bless You!

Ironically it was 4 years ago yesterday that I lost my Mother.  I had been her caregiver for 8 years, while she suffered thru Dementia.  My train project was therapy for me during this time.

My first, last and only experience with O Gauge Trains started back in 2009.  I ended up with a 20' x 60' addition for trains only, running up to 11 trains simultaneously on four levels.  I can honestly say that it would not have happened without Barry's support.  I was drawn to the technical side of the hobby, namely DCS.  With 3 Z 4000 's, 3 TIU's and 9 AIU's I turned to Barry on how to design the electrical system for the layout.  For a newbie this was a huge undertaking and Barry was so kind, gentle, most of the time, and understanding of an inexperience user.  I listened to everything the man suggested and looking back now am so glad I did.  While small issues have come up with the passage of time, Barry's design for my layout exceeded all expectations.  He was truly a Master of DCS and a genuine friend.  Living in Florida I even had the opportunity to visit with Barry at his home, near Deltona Florida, and he was a very gracious host.  I attended most of the Wednesday night DCS User's Meeting and was always blown away at Barry's willingness to help anyone with any level of experience.  He will be sorely missed.

Barry, rest in peace.

So sad to learn of Barry's passing. I never had the pleasure of meeting or even speaking with Barry however through posting on the forum he helped me many times with DCS questions. I often wondered how much time daily, weekly, monthly he volunteered to answer questions our train community had with DCS. His knowledge and commitment are irreplaceable. 

I will be praying for him and his family at this time. 

Last edited by Gerry
Freight Train Jim posted:

If you had a DCS question of any kind, Barry took the time to reply with the correct answer. He did it for me numerous times. He will be missed for sure.

Yes, and essentially a conversation until your issue was resolved. His books have helped many of us. Condolences to the family for their loss.  

Last edited by BobbyD

Everything that you need to know about DCS is all in MTH’s “The DCS Companion 3rd Edition!"

Words you came to expect when someone new to the hobby or DCS posted on the forum. This was Barry's advice after freely volunteering a solution to one's problems. I don't know if these exact words will continue to live on, but I suspect the knowledgable response so many veterans of DCS passed along as a tip will be with us for a long time...."just buy Barry's book".

His is a name no one familiar with the forum will soon forget. May he rest in peace and prayers for his family and friends. Thank you, Barry.

Allan B. posted:

My father never had a stroke. He had an arythmia issue in York and he had been having other health issues. This is all I will say at this time andwould appreciate a lack of speculation and respect our privacy. I will post something later today. Thank you all for the wonderful and kind words.

Regards,

Allan Broskowitz 

This shouldn't even need to be said. Let's just honor his memory.

Knowing Barry he is not just resting in peace. Barry found peace in helping all of us who love creating a miniature world and getting it to run right. So now he is up there helping God run his big layout, our planet earth. If you think about it, Barry will always be alive with us. He will talk to us every time we pull one of his books off the shelf and read through the pages. Thank you so much to Barry's family for allowing him to devote so much of the day to all of us here on the forum. I am sure we all were also family members to him.

Craig, Your sentiments "Barry's life was an example all of us can follow.  He was unselfish in his willingness to share his knowledge and help others. " truly captured Barry's spirit.  I met Barry in person at York and while he an I were Beta Testing early versions of DCS.  My layout was also a Beta testing platform for TMCC/Legacy so I was on the phone or email with him frequently to discuss issues I was having with two Beta command systems of software releases. He always took the time and was very willing to assist me in isolating an issue.  He was most likely the most influential person in my  appreciation of train command systems. He was a wonderful man and I will miss him greatly and pray for him each time I pick up a DCS controller.

I had the fortunate pleasure meeting Barry by attending his DCH meeting at York last October.  He was indeed the guru on DCS.  His absence is like missing your next breath.  I wish his family and friends our deepest condolences during this period.  An event like this always gives us a greater perspective in life and the task we are charged to do while here for a brief period.  Godspeed to Barry and to his family.  He will be sorely missed.

And a prayer to everyone's health and well being.  

Barry Broskowitz, Alav hashalom ( upon him is peace). You will be missed by the O gauge model railroading community. Thank you for your patience in answering my questions on DCS.  May your life live on in the fond memories of your family and friends. Shalom, chaver (Goodbye, friend).  My condolences to the Broskowitz family, may God bring peace and healing for your loss.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×