Skip to main content

Currently, after reading lots about where to place TVS's, the most convenient place for me is at the lockons.  Every lockon that I use has a TVS device with it.  Some of my lockons are MTH lited lockons and hooking up power to them isn't hard even considering that I have a TVS device on it already.

However, I also use the old style Lionel lockons with the clips.  It's extremely difficult to insert a wire into a clip when there's already a TVS wire there.  In fact, the only way that I can do it is to use solid wire, stranded never works for me.  Additionally, it's pretty hard to install a TVS device in it so I leave the TVS device installed permanently so removing them so I can install a power wire 1st isn't a practical solution.

I've been doing that for several years now but a thought just entered my mind that I would like to ask about.  Would it be just as effective, or 99%  close to being the same, if I connected a lockon on the track that had a TVS device and right next to it connect another lockon that I would use for track power???  I have tons on lockons so quantity wouldn't be an issue.

As always, thanks

Walt

Last edited by walt rapp
Original Post

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×