Spent hours on this problem today. On hold with Lionel support for an hour with no response. Maybe this will help someone else. I bought a new in the box 2315 coaling station complete with a UCS power track section and control. I hooked up the wires per instructions. All station functions worked perfect but the 3469 dump car did not. I then noticed the center magnet getting very hot. After awhile I got brave and started moving wires around on the UCS track. The instructions said to place a jumper wire from kit on posts 2 and 4. When I moved the jumper to posts 1 and 2, all functions worked.
Original Post
