I finally got around to using the ALL softkey following DCS tips No. 7 for MU'ing my PS3 Bipolars, however the PSA sound effects do not activate. Running 6.10 in DCS. Is this a known issue or is there a workaround?
Original Post
Replies sorted oldest to newest
Hi did you press the PFA button on the remote, while the train was running then the train voices should start talking about station stops etc did it do anything. if not i would try a feature reset and factory reset! then try again!
Alan
Hi Alan, yes, I pressed the PSA button, but nothing. Note that the PSA features work when operating each bipolar by themselves, but not under ALL command. It's not a big deal, however, at least I can run PS3 as lashups now 
Hi you might try a feature reset and then a factory reset It might clear your problem!
Alan
I'm guessing the PFA features in an MU not working might be by design. If you want to use PFA with multiple engines, configure an MU and that it will probably work.
I think JOHN a is right. I had same problem with my three ROCKY MOUNTAINEERs GP40 s, MU, and the PSA will not play. But individually they play.
PFA can work in a MU consist. I've run a Niagara and NKP 765 together quite a bit and have them cycle through a PFA sequence. I don't have a huge dataset at the moment but I think that it should also work with diesels as well.
It should work in an MU consist, but I doubt it'll wake up using the ALL engines function.
I just did a PFA with an MU of two NS Dash 8s, one being PS3 and the other PS 2/3. Worked fine; started on its own after the last sequence.
