I have a PS1 powered B-unit that I would like to use with a PS2 F3 A. Is there any way to tether the two together? I think the B-unit DCRU would have to be bypassed and the B-unit would have to be controlled by the PS2 system. Any help would be appreciated.
You'll have to scare up a PS/2 slave board if you want to control it with the DCS system. That's going to take considerable wiring, so you might be better using an upgrade kit and making the B-Unit a separate powered engine. Then you can MU them and run them together. There's no way to use the PS/1 electronics and run with DCS.
Access to this requires an OGR Forum Supporting Membership
