Skip to main content

Replies sorted oldest to newest

If you're running strictly conventional, you'll need the RailSounds power supply and an appropriate diesel sound board.  If you plan on running TMCC Command, you'll need the R2LC board as well.  The speaker is an 8 ohm speaker in the 1-3 watt power range.  I don't know if that fuel tank has provisions for mounting the speaker, if not I typically just put them inside.  You'll also have to round up the connectors/cables to connect this stuff to the motherboard.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×