I need to get the body off the true sounds tender, this loco is from around 1997 I believe. Anyone know which screws need to be removed to get it off? There are a bunch of various sized screws on the underside, many are in real tight.
ThANKS FOR ANY HELP
o gauger
Replies sorted oldest to newest
The very small screws are the ones that need to be removed. They are brass. Use a good/proper size screwdriver and push hard against them so you do not strip the phillips head of the screw.
Marty,
Thanks a bunch! Will do!
o gauger
The screws should all be the same size, probably 4, and will most likely be near the outside corners of the tender. You may have to swing the trucks out of the way to access the screws.
Lee Fritz
That is where the small screws are. On the corners.
Access to this requires an OGR Forum Supporting Membership
