Want to use a longer hook up to my RealTrax Operating Track section. Switch in stock control looks like a double pole, double through with momentary (on)-off-(on). However I can not for the life of me figure out with my meter how it work. Does anyone of you kind souls have a schematic drawing that would help me out? Thanks in advance!! Terry Brown GT&T railroad. (PS) forgot to mention I will be using new switches and wire to control panel. Will not use MTH control.
Replies sorted oldest to newest
Do you have these? MTH Instructions
I use Atlas track and do not have a Realtrax operating track section to look at. If you don't already have the instructions, they may be of some assistance?
Have instruction manual, however I did find in the AIU manual a clear way to hook up the track section to a new switch. I appreciate the feed back, and hope you are having a "Great Day".
Thanks. Glad you are getting things figured out. If you have DCS and you don't have the DCS Companion (aka Barry's book), I would highly recommend getting a copy. Lots of good stuff in there that is not in the DCS manual. Your mention of the AIU made me think of it, it also has info on AIU wiring to different items. Good luck!
GT&T Railroad posted:...I did find in the AIU manual a clear way to hook up the track section to a new switch...
So you're good to go, right? The diagram from the AIU manual suggests a single-pole (on)-off-(on) vs. double-pole as you state in your OP.
Access to this requires an OGR Forum Supporting Membership
