can anyone post a pic of how a 675/2025 smoke unit mounts? The Greenberg Repair Manual doesn't show anything, And neither of my 675s have one installed. Working on my junkbox 2025 and like get this on. Thanks!
Original Post
Replies sorted oldest to newest
Your Greenberg manual should have a separate chapter on smoke generators. There is a good drawing of the 675 smoke unit in that section.
The smoke unit bracket has a small flange bent at the bottom. A self tapping screw goes up through a hole in the the bottom of the cowcatcher to engage a hole in the middle of the flange.
David I thought that, but mine doesn't. I'm not sure these are the right units for this engine, I got a 2025 and a 2035 in a box disassembled , and there were three units, and one has a motor mount bracket.
CW...that's what I needed to know. I had it in my head that the smoke until mounted to the motor. Fit like a glove.
Thanks guys.
Think on those it mounts to the steam chest, not my pictures
Attachments
Images (2)
thanks Dennis, that's where it goes.
those upper two are the right ones, that lower one is for a 2026 or 2037, something like that
Attachments
Images (1)
I figured the one with the bracket was for a 2026 or 37, but it's been so long since I pulled the non working unit from my first 675 I couldn't remember how or where it attached.
call me tomorow... 814 573 1691
all together and smoking
Attachments
Images (1)
