Skip to main content

The LC+2.0 Hudson I own has a drawbar that contains contacts to connect the loco and tender. While looking at the pacifics like the one in the "subject" it looks like it has a standard drawbar (no contacts). I don't see a wire in the picture. Are these units optically connected? Or is the wire hidden in the photo?

http://www.lionel.com/products...pacific-801-2232110/

Bobby

Original Post

Replies sorted oldest to newest

Pro tip- what the big "L" advertises is not always what ships. Pictures should have a disclaimer, colors and actual details may not be accurate.

If you had gone to the product support page-

https://www.lionelsupport.com/...us-2.0-Pacific-801_2

not the advertising page, and pulled down the manual.

https://www.lionelsupport.com/...02%20Pacific_web.pdf

I also went on Youtube and tried to find a video of a Lionchief Plus 2.0 Pacific of the same series. I did not find the exact engine, but as an example https://www.youtube.com/watch?v=yHwFYGJOkk4

You can see the same drawbar system



Attachments

Images (2)
  • mceclip0
  • mceclip1
Last edited by Vernon Barry

Again, sorry to say, you literally stumbled across one of my complaints of the BTO model and current and recent catalogs. The big "L" renders and recolors previous photos and 3D models and are typically NOT actual samples and photos of what you "think" you are buying. Technical details, visual details, and yes, again especially paint color, probably will not match.

Just remember- customer service says we are too picky and they are just toys.

Last edited by Vernon Barry

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×