A can is stuck in the car. I am trying to remove the car body to get to mechanism. There is a body screw only at one end of the car, but removing it does not allow for the body removal. I do not want to break the body as it is original. What is the key to remove it?
Replies sorted oldest to newest
There is a tab or two at the end of the car opposite the screw end. Remove the screw and tilt the car body towards the end with the tabs. Sometime the body of the car fits very snuggly to the frame so work slowly.
There are two large spring clips under the frame use a screwdriver to snap up then squeeze clip and it will release body. I’ll see if I can find picture
The door frames must be taken off first to release the body. No spring clips on the 3482.
Access to this requires an OGR Forum Supporting Membership
