Is there more than one person out there who would like a Controller (copy of original) for the (6-12767) Steam clean / Wheel Grind shop?
If I make one, I might as well make a batch.
Original Post
Replies sorted oldest to newest
I don't need one, but I thought I'd bring back this day old thread just in case someone who needs one missed your original post.
The original is kinda big and clunky...but then so is the accessory. Making a new one should be simple. 3 momentary on push buttons and an on/off switch.
Bruce
Originally Posted by brwebster:
The original is kinda big and clunky...but then so is the accessory. Making a new one should be simple. 3 momentary on push buttons and an on/off switch.
Bruce
NO, here's a partial parts list:
1 spst on/off power switch
3 mom sp switches
4 3A 400V standard silicon rectifiers
1 2200 microfarad 25V capacitor Mouser Part #: 667-ECO-S1EA222BA
Box (Lionel box is 4" x 6" x 2" deep)
Some Steam Clean and Wheel Grind sets have already been damaged with direct AC voltage.
Originally Posted by Susan Deats:
Originally Posted by brwebster:
The original is kinda big and clunky...but then so is the accessory. Making a new one should be simple. 3 momentary on push buttons and an on/off switch.
Bruce
NO, here's a partial parts list:
1 spst on/off power switch
3 mom sp switches
4 3A 400V standard silicon rectifiers
1 2200 microfarad 25V capacitor Mouser Part #: 667-ECO-S1EA222BA
Box (Lionel box is 4" x 6" x 2" deep)
Some Steam Clean and Wheel Grind sets have already been damaged with direct AC voltage.
Sometimes we don't know what we don't know.
Originally Posted by Pingman:
Originally Posted by Susan Deats:
Originally Posted by brwebster:
The original is kinda big and clunky...but then so is the accessory. Making a new one should be simple. 3 momentary on push buttons and an on/off switch.
Bruce
NO, here's a partial parts list:
1 spst on/off power switch
3 mom sp switches
4 3A 400V standard silicon rectifiers
1 2200 microfarad 25V capacitor Mouser Part #: 667-ECO-S1EA222BA
Box (Lionel box is 4" x 6" x 2" deep)
Some Steam Clean and Wheel Grind sets have already been damaged with direct AC voltage.
Sometimes we don't know what we don't know.
LOL Obviously I've been schooled. Thanks for the heads up on ALL the components, Susan. If ever I need to go inside then I'm prepared.
Bruce
Originally Posted by nikkog:
Originally Posted by Susan Deats:
I could really use two of those controllers for my Steam Shops. Do you sell them? Thank you, Nick
This controller controls one Steam Clean, Wheel Grind and Train Wash set.
Do you need TWO controllers or just one?
I have none for sale now. If I do build a copy of the Lionel Controller, it would cost the buyer around $90. I did build a test circuit (as a favor) so another set owner could test his components to be sure they they operated. They did work but he hasn't committed to have a controller made.
Attachments
Images (1)
If you would like to build your own controller, see my web page with photos of Lionel's controller and circuit wiring diagram here
12767 Steam Clean And Wheel Grind Shop
OR, I will be happy to put you down for one Controller as soon as I can get it built. (It may take up to 6 weeks.)
Susan, I will purchase one controller when you build them. Can you send a
pic of what they look like? Thank you Nick nikkog53@gmail.com
On Jan 7, 2015 1:49 PM, "O Gauge Railroading On Line Forum" <alerts@hoop.la>
wrote:
pic of what they look like? Thank you Nick nikkog53@gmail.com
On Jan 7, 2015 1:49 PM, "O Gauge Railroading On Line Forum" <alerts@hoop.la>
wrote:
