6-38056 Lionel M1a

Edmund Schwartzel 060518OGR Forum Member DIGITAL SUBSCRIBER

I have been having problems with the Lionel M1a 38056 so I pulled out the original electronics and bought a new Cruise Commander. Starting all over. So I did put it in the location of the old command board and have the unit running on the workbench. But now I am thinking I should have placed it in the tender???? But my big question is can the wireless tether or do i use a 10 pin?

Thanks in advance.

2/19/2011:19 AM

❤️ 0

Original Post

Replies sorted oldest to newest

BobbyDOGR Forum Member DIGITAL SUBSCRIBER

If you place it in the tender the engine will no longer operate alone correct? Sometimes that is a big help when troubleshooting.

2/19/2011:24 AM

❤️ 0

Edmund Schwartzel 060518OGR Forum Member DIGITAL SUBSCRIBER

There is a DCDS, and a, what Lionel calls the Motherboard. The Cruise Commander is 1/4 too long to do a swap out of the DCDS so I think I can leave the Cruise Commander in the engine an tether back to the tender for the sound boards? But do I use wireless or a 10 pin?

2/19/2011:44 AM

❤️ 0

CLICK HERE and Subscribe to the OGR YouTube Channel!

6-38056 Lionel M1a

Add Reply

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!