Skip to main content

I have had the Atlas Founders Series #1701-2 0-6-0 Burlington for a couple of years now. I need to remove the frame from the boiler. I removed 2 screws from underneath the cab and a single screw just behind the front coupler. 

The back of the frame is loose but the front is still attached to the boiler. I looked for other possible screws, even loosened some but nothing seams to loosen the frame. I did send an email off to Bill at Atlas but wonder if someone on this list has any suggestions as to what other screws hold the frame to the boiler.

Thanks,

RAY

Original Post

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×