Moving this out of the realm of electrical to try and finish this up. So, Decals or the like where the text on the Globe below would match the transfer pump. I can print it out in Black and it looks fine... the deepest, darkest Red, not so much. Any advice is greatly appreciated. Thank You!
Replies sorted oldest to newest
My first thought is print it on an overhead transparency slide. But buying a box of transparencies is $50 - it will work, but maybe FedEx or UPS ship & print shop would print one page and you wouldn’t have to buy a whole box of supplies.
Along the same thought, creating a decal that you attach to transparent material would work - in both cases can put a backing around the numbers to block light except through a rectangular cut-out, if you get my drift.
Just thinking! Sometimes I come up with really exotic and expensive ideas that trigger super simple solutions by someone else!
The problem is, it's a rounded surface. I don't see how a transparency is going to work there.
Double up on the red decals: one on top of each other. Should be a dark red, John A
Hmmm. I guess I'll head up to the print shop this morning and see what they have. The Black was printed on my Laser printer... the Red on the neighbors Ink Jet. The good news is that it's only 0.45 cents per color copy/page at the print shop. I'll report back... and, THANKS!
Access to this requires an OGR Forum Supporting Membership
