hello after a short way out of tracks and mini electric short cut , my ps2 mth ,would not engage the traction mode , resume ,i am on ac 20 v dimmable , i put 14/15 volt earing twoo bells , going under 10v earing the pressure out noise and cut the current few seconds and normally it starts , but in this case no , any idea , to reset or to check where can be the dammages ? thanks for help
Replies sorted oldest to newest
hi how about an engine item number so we can help you? MTH item number! could be a ps 2 5 volt board or a ps 2 3 volt board item number will help identify!
Alan
hello , its the 20-2154-1 cab 9720 thanks for help , sound seems ok justs direction ways dont want to start
Try a new battery David.. I believe this engine is a proto 1.. Good luck.
i ll do it , hoping that i get a result
i ll inform you forward
hello every, body , battery is changed but no more things changed ! i look to the electronic part , it seems be on twoo level , down one seems to be the drive unit and up unit seems to be sound unit , wroten on the cpu the model sound what we use , diesel , electric etc ,i ll try to change drive unit to see , what ll happen ,connection of wire seems to be same
i remove the battery , one hour hoping that ll help , but no more event happened
absolutly !
Access to this requires an OGR Forum Supporting Membership
