Skip to main content

2 replies

Converting old NY Central ABA PS2 diesel to TMCC and Rail sounds

C ChooChoo1972OGR Forum Member

I have an older set of MTH PS2 NY Central ABA diesels that are the type that connect with a tether. The PS2 command control is flaky in these and I am moving away from DCS in my train room. Is there anyone who posts on this forum that is interested on taking on this job to convert these to TMCC and rail sound? Please e-mail directly at the e-mail address eblow. thanks

Original Post

Replies sorted oldest to newest

N NortonOGR Forum Member

Its a fairly easy installation but not inexpensive as you would need a set of motor drivers for each A unit. You might consider getting an engine with TMCC and selling what you have. K-Line NYC ABAs come to mind and typically sell for what the electronics would cost for your upgrade not even considering the cost of labor if you don’t do the installation yourself.

Pete

Add Reply

Views: 241
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×