Hi, I was checking the posts on the transformer and would like to know if I can use my transformer without the fan working. Everything else works fine. Thank you for your time, John.
Original Post
Replies sorted oldest to newest
It will probably overhead in time, especially if you're putting a significant load on it. The fan is there because the triacs that control the voltage get pretty hot.
Pretty sure that's a plain computer 12V fan, they're only a couple bucks.
@gunrunnerjohn posted:It will probably overhead in time, especially if you're putting a significant load on it. The fan is there because the triacs that control the voltage get pretty hot.
Pretty sure that's a plain computer 12V fan, they're only a couple bucks.
Doesn't that transformer have unusual heads on the screws that hold the case on? Triangular screwdriver needed?
@Mallard4468 posted:Doesn't that transformer have unusual heads on the screws that hold the case on? Triangular screwdriver needed?
Yep, an old Phillips screwdriver and a grinder solve that problem. 
You can also buy those triangle driver sets for a few bucks on Amazon.
Thank you very much for your response. I think the ogr posts are very helpful. I'll check this out and thank you again, John.
