If I bought a Lionel Cab 3 system would I be able to operate Lionel Legacy engines with the MTH DCS remote and TIU if it was connected to the Cab 3 command base or is that strictly a wifi interface system?
Original Post
Replies sorted oldest to newest
If the Base 3 has the same port the TMCC/Legacy bases had I'd venture to guess you should be able to.
Dave answered that question in episode 17 of Demos With Dave-Base3, Part 1. It will require an SER2 connected to the Base3 if I followed his description. The Base3 includes a built in WiFi module.
Yes you will. You will need the SER2 like mentioned above and the DCS to Legacy cable. DCS will operate Legacy engines in TMCC mode using the handheld remote. To operate Legacy engines in Legacy mode you will need the MTH WiFi enabled TIU or a TIU w/ WIU and the app.
