Skip to main content

I’m starting a Cruise Commander Modular install, and I was wondering about pin 2on J4.  I was going to use the ERR supplied 10 pin connector to the blue serial data in from the R2LC at pin 1, and solder it like shown in their example.  This ERR 10 pin connector also has a green wire at pin 2 for serial data out to sound.  Do I need this green J2 wire, or just the 1 blue serial data wire shown in their example?

It’s a pre-odyssey  Lionel 6-18589 tmcc Alco 420

2594B8DC-C086-46A2-B6F5-AA243D74F63FF5787614-B248-42A7-8562-33754F182528DA1A841A-8743-4922-BAEA-57780CA69571

Thanks....

Tom

Attachments

Images (3)
  • 2594B8DC-C086-46A2-B6F5-AA243D74F63F
  • F5787614-B248-42A7-8562-33754F182528
  • DA1A841A-8743-4922-BAEA-57780CA69571
Original Post

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×