Has anybody used these to connect power to the tracks (Ross Track) and how well did they work.
Thanks
Tony
Original Post
Replies sorted oldest to newest
Originally Posted by pandw:
Has anybody used these to connect power to the tracks (Ross Track) and how well did they work.
Thanks
Tony
I use them and I like them. The 930s replace the pins connecting the sections. You have to use a degree of care to not break the soldered wire off of the pin. The 931 has a male spade connector. It inserts into the seam on the bottom of the rail.
Given the choice, I prefer the 930s.
Gilly
I am using them on my rebuild of my current layout. On unsightly wires solder to the sides of the rails. Charlie
I used them with Gargraves stainless. I used the 930's also and would second that you have to use some care not to sever the soldered wire drop from the pin when pushing tracks together. I broke a few, but then got the hang of it and they worked well. They come with black or white wire drops. I used the black drops for the center rail and the white drops for the outer rails. That made it easy to hook up the wires properly under the table.
