I need to replace the bulb in the caboose of this set. I can't seem to figure out how to access the bulb / take apart the caboose? Any ideas? http://www.lionel.com/products...w-bluetooth-6-84700/ Caboose a.k.a. 6-84700-C
Original Post
Replies sorted oldest to newest
Thank-you for the links kj, indeed I found the parts list. The .pdf of the caboose instructions don't work with the Hot Wheels Caboose - there are no visible screws. I can't figure it out! I've emailed Lionel. When I find the solution I'll post it here............................
Actually Mitch, his caboose is a little different. Same principle as shown in your video though. But on his caboose the frame and the body are all one piece. The roof is the separate piece, instead of the frame.
It is the entire roof that comes off. Though it can be a pretty snug fit... you push upward on each side of the caboose roof overhang. You don't necessarily have to loosen the black delrin plastic caboose ends, but it will make it a little easier to have some leverage to push that caboose roof loose from the caboose body assembly.
Like I said, it's a snug fit and you have to work it upward from each side of the caboose overhang. The window glazing piece may also be so well attached to the roof, that it comes loose also.
Whups! So it is. Time for another chapter:
https://ogrforum.com/...1#159096765056849631
I just love digital SLRs, don't you? 
Mitch
Thank-you gents! Indeed I thought I was going to break the darn thing taking off the roof! Yikes.
I complemented Mr. Marmel's post: https://ogrforum.com/...1#159096765056849631
Much appreciated! 
RVB
