How do you know if your lionel engine has railsounds 5 and which setting to use in the legacy handheld. What happens if you use the 100 speed step rating on a lionel tmcc engine?
If I remember correctly the RS5 was the first one where you could understand what the engineer was saying in the cab chatter. Using REL100 won't break anything, but its best to use TMCC for TMCC engines
Best thing though is go look at Lionel's website and get the details about your engine
If the engine has a third party cruise control, aka NOT Lionel Odyssey, then you may want to set the engine's mode to CAB-1 and access the additional speed steps this way. In general, an engine with just a TMCC receiver and no aftermarket cruise will only have 32 speed steps available and should be set that way on the CAB-2. If you have a TMC with Odyssey 1 you set the engine to TMCC.
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
Access to this requires an OGR Forum Supporting Membership
OGR Forum Supporting Membership
Help support this forum with an OGR Forum Supporting Membership. You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM! A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!
OR
Access the ALL the OGR VIDEO FORUMS ANDover 300 back issues of OGR with a DIGITAL SUBSCRIPTION!