Skip to main content

I have this ABA set from 2005 or so. it's an ABA set and the three plug in to each other. The A and b are working but the end A 302c has no lights and the motors are not running. is there any kind of diagnostic I can do on it? I opened and all wires seem to be intact to board etc..As K-line is no longer around can I get service and parts for this? It seems it would have something to do with the electronics which are Lionel. I run the a/b together no issue. I live in the Westchester Ny area if anyone has a repair shop reference. Thanks for any help.

Original Post

Replies sorted oldest to newest

Your set of K-Line engines are probally from before Lionel take-over of K-Line.

To do a test of voltages yourself, you may need to improvise a connecter to insert into the wire harness, sometimes little sewing needles will fit into a wire harness plug-in. Test from where you know you have a working unit to where it don't work, maybe you can take the B unit out and run the two A units together and see what happens.

Sounds like you have a broken wire in the tether harness.

 

Lee F.

Post
×
×
×
×
Link copied to your clipboard.
×
×