Hey guys,
I was running my 2 Lionmaster SD90s in a lash-up today and could not get the horn, bell, crew talk to activate but the prime movers were making their sounds. I switched the front and real locks around and the lash-up worked perfect. Individually there was no issue with any of the sounds. Has anyone had to troubleshoot this before? I'm running them with CAB1 And original TMCC. Thanks.
Jay in Ottawa
Replies sorted oldest to newest
Hi. This is normal behavior in a lash-up. I believe that this is based upon the premise that the crew are only in one locomotive. I think that you can change this with some locomotives, but not all.
Thanks Nicole but I don't think I explained it very well. I know that normally only the front loco will sound its horn and bell but in this case neither loco would sound its horn until I switched their posns and reprogrammed the lash-up. Maybe just a normal computer glitch...just wondered if anyone had a similar problem.
Thanks,
Jay
Sorry Jay. My fault for not reading your post properly. 
Perhaps you managed to disable the horn on the lead locomotive when you were building the lash-up. I know that you can do this in Legacy, as I've done it myself by accident. So you can probably do this with a CAB-1 too. I'm glad that you managed to correct it OK though. 
You probably need more rope to lash them up tighter. 
You probably need more rope to lash them up tighter.
So, if you lash up trains...would a string of boats be a consist? 
Only if you wrapped the string around them twice.
Ron
Access to this requires an OGR Forum Supporting Membership
