Does anyone have access to the Legacy schematics for a 6-28345? There are a couple of missing plugs/wires from my donor engine and I would rather try and find a schematic vs. opening up an engine and trying to trace wires.
Original Post
Replies sorted oldest to newest
Thank you for the link. That is an informative document, but mine appears to be older than that. Two of the three two pin connectors on the left side of the board seem to be track power, not sure what the third goes to. I was able to mock most of the wiring up with the exception of that plug.
Attachments
Images (1)
Yes, you have the Legacy modular electronics package that came before the RCMC electronics. The break point was around 2011 when the RCMC started being used.
Your ohmmeter is your friend, the pinouts of the individual boards are well known, so just ring them out to the connectors.
gunrunnerjohn posted:Yes, you have the Legacy modular electronics package that came before the RCMC electronics. The break point was around 2011 when the RCMC started being used.
Your ohmmeter is your friend, the pinouts of the individual boards are well known, so just ring them out to the connectors.
The RS power supply on this set up is the same as the RS 4/5 supply isn’t it? The actual sound board is the 9 bit vs the 8 bit correct?
Yes, they RS4 thru RS6 all use the generic P/S board. However, don't put the RS6 board into an older motherboard, bad things happen. There are some pin differences, though most are the same.
