Lionchief 2.0 powered by dcc?

Bobby,

You may be able to find some hints in this thread:

     Question can Legacy and DDC be run at the same time on the same track? (7/8/16) | John Graser

Although this thread is specifically about Legacy, and also appears to mention conventional control, there is a good discussion on the characteristics of DCC and how they likely impact the operation of non-DCC locomotives.

Mike 

It may work with Bluetooth control, you'd have to try it.  I can assure you that it ain't gonna' work well with TMCC!  The issues with Legacy and DCC would be the same with TMCC, it's the same signal on the tracks.

Thanks gents, I should have mentioned there's no Legacy or even TMCC here (yet anyway). The only way I have to control my LC2.0 loco is via Bluetooth or conventional. I do have a dcc system, but I don't want to use my LC2.0 as a guinea pig. Just wondered if somebody else already had tried it. The chances are slim of course, but thought I'd ask anyway.

Bobby

Hi Bobby, thanks for initiating this question earlier. Did you end up finding any solution of running LC2.0 with Bluetooth control and with DCC track power?

Bhadri

Bhadri, here's a link to answer your (and my) question...

https://ogrforum.com/...4#173738480962689144

Hi Bobby,

Thank you. This is very informative. My super long term ultimate goal is run 3-4 trains at the same time. But all at the same time sharing tracks and running with -automation- and not crash into each other.

I am hoping in the long run, I am able to run

1) DCC control and power for Atlas/MTH trains and automation with JMRI.

2) DCC power and Lion Chief Control for Lionel. In this case I am just hoping that JMRI can send TMCC control signals to Base 3 which can send blue tooth signals to Lionel train to enable automation.

3) DCC based switch control automated with JMRI

I am very much a beginner on this. And might be making some mistakes. I am just hoping that I do not make too many.

Bhadri