Skip to main content

Replies sorted oldest to newest

texastrain posted:

Bill,

  I have two 115 stations, will take a look inside, perhaps take some pics and post them for you.  I cannot get done tonight, sorry, but will do so tomorrow, ok?  Perhaps someone else will post what you need before then, but even so, I will post some interior wiring pics asap.

Jesse

Thanks, Bill

bmoran4 posted:

I think the 132 is very similar:

https://ogrforum.com/...-pre-war-115-station

Brian:

Thanks and as evidenced in my response to Eddie almost 6 years ago, I do have the wiring diagram for the plastic base #132 but my problem seems to be related to the metal base of the #115 station so that is why I wanted the #115 diagram.

I just replaced the thermostat and the missing #3 terminal but now I’m getting an intermittent short.  Some of the insulation on the original wiring to the lights has worn off and perhaps a bare wire is touching the metal base.  I’ll have to tear it apart again and replace all the rest of the original wiring.

Bill

Bill,   I hope the attached pics and my diagram of the wiring on my Post War 115 are of use to you.  You can see mine also needs repair/replace of the original wiring due to loss of insulation in some areas.  Mine is for display, only, and I use one of my 132 stations for the pass train control.  You have me thinking of putting my, with repairs, on my layout, now.

JesseIMG_5673IMG_5672IMG_5671IMG_5668

Attachments

Images (4)
  • IMG_5673
  • IMG_5672
  • IMG_5671
  • IMG_5668

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×