Hi have a problem with my eng was not working ,found it has 3 wires going to a sound adjusting pot red blue yellow, and they hook up to a pcb with a number 691-RSOE-A00 on it
tried to look it up on the lionel website got no hits. can anyone out there help me. i'm thinking the number on the board is not a production number just a board no.
if anyone could give me a clue i would appreciate very much
i can send or post a picture if it would help
samc
Replies sorted oldest to newest
Which locomotive are you referring to?
What engine...? Lionel # and what it is...easier to look up the board that way.
Diesel? Steamer? Cab Number? Product number? All this info makes it so much easier to help you; Falcon70
Its likely an audio motherboard that is no longer available which is why you can't find it. If the pot is not connected to the board you won't get any sound.
Pete
hi all
the board is in an MTH locomotive not an lionel... some one had problems with the pro 2 sounds and switch it..
that my dilemma
but if lionel did make this for a while, then i was hoping someone out there might just
have an answer... like the lionel board might have the same wiring scheme like on other newer board...
thank you for reading this.
samc
If it's in an MTH locomotive it sounds like someone has been in there tinkering. I can't imagine how a board with that part number format found it's way into an MTH locomotive from the factory.
Of course, one has to wonder why so secretive with the actual model number or even the type of locomotive???
It is an MTH but someone modified it with these parts... that is my dilemma
that is the question i'm asking. does anyone have an idea what this lionel board is and how it was wired up. three wires broke off the volume control pot and i need some kind of diagram or picture on how to solder them back in place.
it is in a
MTH Premier
20-3038-1 Pennsylvania 4-4-2 Atlantic Steamer E-6 / Penn, No. 460 Tuscan roof
no secretive needed
sc
Pictures of your board would be worth 1000 words...
Taking a stab in the dark:
What board and part number for the board is that?
sam c posted:It is an MTH but someone modified it with these parts... that is my dilemma
that is the question i'm asking. does anyone have an idea what this lionel board is and how it was wired up. three wires broke off the volume control pot and i need some kind of diagram or picture on how to solder them back in place.
it is in a
MTH Premier
20-3038-1 Pennsylvania 4-4-2 Atlantic Steamer E-6 / Penn, No. 460 Tuscan roofno secretive needed
sc
Does the pot to board cable plug in? Try just soldering them in the order they are on the plug.
It is the Rail Sounds Lite family board which includes the ERR Rail Sound Commander.( http://www.3rdrail.com/err-3rd...lSoundsCmdr-Inst.pdf )
May be worth looking at these diagrams as well: https://ogrforum.com/...RSLITE%20Jan2017.pdf
thanks for the railsounds lite family, link. BMORAN4
looked over the pages and it is or could be a railsounds lite board. but the 3 wires to the volume control switch is not a plug in type.
i do know where one of the wires goes. the blue one now have to figure where the red and yellow goes to and soldier them on
going to try to look on the lionel site tonight and see if i can get an older model board and it there are any Wiring schematic for sound board
you have been a great help. thank you
samc
One of the color patterns I have seen is blue goes in the middle, brown towards J8 (the short 2 pin connector), red towards J2 (the long 9 pin connector)
How many times do we have to ask for a picture?
Thank you will see if that will work.
samc
Access to this requires an OGR Forum Supporting Membership
