Skip to main content

Replies sorted oldest to newest

@Alabama Joe posted:

There is a new CAB3 update available for IPhone

These are the fixes we have received in the last update.

  • Cab3 Update 4

    V1.1.046

    Release date: 11/5/24

    This release fixes the following:

    • Wi-Fi connection changes
      • In Wi-Fi configuration screen, when you hit SET, a pop-up will show
      • Pop-up if attempting to connect to non-Base3 devices
    • Numerous fixes for 4-Digit engine performance particularly for VISION TriPlex support
      • SET command now repeats when held down
      • Direction synchronization on throttle changes
      • Throttle to zero now reliably stops loco
    • TMCC Train start-up/shutdown commands
    • TR tab occasionally crashes APP

My android CAB3 app updated to 1.1.46-156. Then I found a bug.  Legacy Powermaster using the ENG address.   Every time I move the throttle up, track power goes to 0 then back up to where I set it.  Still does it after the Base3 1.28 update.   Not good for conventional engines.  Especially with the E unit engaged.    I have a volt meter on the track and can watch it happen.    I turned it in.   I guess I am still waiting for the next update for the CAB3 to work. 

@VHubbard posted:

My android CAB3 app updated to 1.1.46-156. Then I found a bug.  Legacy Powermaster using the ENG address.   Every time I move the throttle up, track power goes to 0 then back up to where I set it.  Still does it after the Base3 1.28 update.   Not good for conventional engines.  Especially with the E unit engaged.    I have a volt meter on the track and can watch it happen.    I turned it in.   I guess I am still waiting for the next update for the CAB3 to work.

I posted my issues with this direction button / throttle position bug in detail and Dave acknowledged. The other critical fix for conventional and TMCC Pullmor motored engines is to have the ability to TURN OFF momentum in CAB mode. I find it impossible to run postwar and modern AC motored engines with the momentum lag, even in low momentum.  I only want one thing - For the CAB-3 app to be able to do what my CAB-1L and CAB-2 remotes can do.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×