lionel lionmaster 6-38075 Big Boy- cruise commander M install problems

You don't need pin-2, just connect serial data to to the CC-M to pin-24 of the R2LC socket.

Please excuse my lack of knowledge but I'm not sure which pin is 24.  So if I figure out which pin is 24, it sounds like I connect pin 1 of the J4 connector to pin 24 of the RL2C socket?

@Ritch posted:

Please excuse my lack of knowledge but I'm not sure which pin is 24.  So if I figure out which pin is 24, it sounds like I connect pin 1 of the J4 connector to pin 24 of the RL2C socket?

Pat

Thanks very much.  I'll give it a try.

John

Thanks for the assistance diagnosing and the information on the installation.  The Big Boy is running well.  I certainly appreciate it. 

@Ritch posted:

John

Thanks for the assistance diagnosing and the information on the installation.  The Big Boy is running well.  I certainly appreciate it.

All's well that ends well.