Lucas Liska

This is a question related to an answer you provided a few weeks ago on my posting "Willliams Hand Rail removal".

You mentioned that you removed the hand rails on a Lionel Geep by cutting them off horizontally. What did you use to cut the hand rails?

The Williams rails appear to be stamped steel. Did you use a dremal wheel (type) or some sort of saw? I want to make as clean a cut possible.

Sorry to have to contact you this way, but I know of no other method of contact.

Thank you for your response.

8/27/129:41 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Allan MillerOGR Editor-in-Chief SUPPORTING MEMBERDIGITAL SUBSCRIBER

You could always send him an e-mail. He is a registered member.

Search for his name, then go to the right of the page and click on "extended profile". His e-mail address is listed.

8/27/129:58 AM

❤️ 0

CarGuyZM10OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER

I just posted a link to this on his facebook.

8/27/122:52 PM

❤️ 0

Lucas LiskaOGR Forum Member

I used a Dremel with a cutoff disc.

Here are some pics of the handrails before I painted them

8/27/123:02 PM

❤️ 0

PC9850OGR Forum Member

Originally Posted by Rockyroad:

I know of no other method of contact.

Um, post the question in the original thread you mentioned?

8/27/123:49 PM

❤️ 0

RockyroadOGR Forum Member

Thanks Lucas...nice looking job. I wasn't sure what to use on the stamped steel. I will have to cut out each section verticle to save as much of the stanchion's height. Williams stanchions are already 1/8" shorter than MTH and Lionel.

I apoligize for contacting this way...I didn't notice the "extended profile" option on the right side of the profile page; other wise I would have contacted via email.

8/27/127:50 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!