Skip to main content

I know this forum is for O scale and that is my main Trains, but since I have MTH DCS and I wanted to see how the MTH HO Scale worked with dCS.

I'm having a hard time finding any info relating to how to setup it up with the MTH TIU and wifi 50-1036 is what I have, full setup.

I keep seeing DC has to be the power source, but I don't have any idea what dc power source to use.  Does anyone have any idea how to setup DCS for HO using the TIU and Wifi modules?

 

Thanks in advance.

Scott

Original Post

Replies sorted oldest to newest

Any DC power source you used for your conventional HO could be used.  Use it to drive Fixed 1 which powers the TIU also.  Alternatively you can get a 1.5A DC power pack to power TIU through the Aux port and then used any channel on the TIU.  Just find a good DC power supply that can provide the power you need for your layout.  G

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×