i know that MTH signals g o through the track. Is it carried through the center (hot) rail or through the side rails?
The reason that i want to know this is because i want to isolate each drop to one segment if track; and I don't know if i have to cut all 3 rails (as i have Fasteack)
Trainrat
Replies sorted oldest to newest
You need the center rail and one outside one, but you can connect the signals to unpowered blocks with capacitors bridging the gaps in the rail. Is that what you were asking?
Do you mean signals like block signals or signals like DCS signals?
I mean DCS signals
Trainrat
You only need to break the center rail to create a block.
Do yourself a big favor. Purchase Barry Broskowitz's "DCS O Gauge Companion, 3rd Ed." from MTH. It will answer ALL questions and save you a lot of time on the forum. Everything about DCS is covered in that book.
bruce
Access to this requires an OGR Forum Supporting Membership
