My new rocket booster train set exposed some major clearance issues on the upper loop of my layout. The only solution I could find was making a 12 foot elevated section to clear my transfer table and such. I got to work with Adobe Illustrator and my local maker spaces laser cutter and this is what I came up with. Think it turned out pretty good. Still have paint and weathering to do, and then final install with the track.
Replies sorted oldest to newest
Bryon, I moved this to the proper forum since this would not be a 3RS topic per the definition in that forum. Also, to make it easier for the membership to see the pictures, I clicked on "post in body" on each picture and now they come up full sized. You may want to do the same as you post pictures in the future. After uploading a picture, click on posting it in the body of the copy and then the pictures will come up immediately when someone clicks on your post.
@OGR CEO-PUBLISHER posted:Bryon, I moved this to the proper forum since this would not be a 3RS topic per the definition in that forum. Also, to make it easier for the membership to see the pictures, I clicked on "post in body" on each picture and now they come up full sized. You may want to do the same as you post pictures in the future. After uploading a picture, click on posting it in the body of the copy and then the pictures will come up immediately when someone clicks on your post.
Much appreciated, still new to the whole forum posting thing.
Byron
Got some painting and weathering done. Really enjoying putting graffiti on my bridges. 
Access to this requires an OGR Forum Supporting Membership
