Skip to main content

Hi Guys,

I am in the process of creating a Girls engine for my Granddaughter, I found a decent candidate which was a MLB stream engine. I don't have the product number. Its a 2 8 4 configuration. The paint striping went very well but about 4-5 of the handrail standoffs didn't survive. They are different heights to conform to the curve of the boiler. Does anyone know if a set is available or the correct part numbers that I need? I've called Lionel and left a message.

Thanks,

Jeff

20201015_14301220201015_143024

Attachments

Images (2)
  • 20201015_143012
  • 20201015_143024
Last edited by Postwarman
Original Post

Replies sorted oldest to newest

Happy to help.  Be sure to share your repaint on the forum.

I did something similar for my daughter a few years ago.  I used a 244 scout, which has an open AC motor rather than the plastic gearbox found in many scouts.  It was a big hit with my daughter.  It was my first repaint, and not the crispest job, but she still reveres it.  I also used some diamond rhinestone stickers over the coal load in the tender, which turned out pretty neat in my opinion.

I think the Berkshire will be a great engine to use for your project.



IMG_1939

Personally, if it were me, I'd replace all of the original ones on that steamer with the older silver metal wire versions that insert in the hole and then you bend outward in each direction. Though on this particular loco, it would be hard to get them at different heights away from the engine body.

At any rate, those current stanchions break very easily. When I've broken them on my locos, I eventually replace them as mentioned above.

Jeff,

You might want to try these from the Lionel Replacements Parts Store.

Part Name: STANCHION / SET OF 18 / BERKSHIRE JR
Part Number: 6208649073

1

I found these when I was looking up parts for the 6-18754 PE Berk Jr, but I would guess that they will work for all Berk Jr shells. Also, it might be a good idea to look into the Berk Jr stanchion placement chart so you know where to place the different sizes of stanchions. Although it is currently unavailable on the Lionel Replacements Parts Store, someone here might be able to shed some light on the correct placement order. I would, but I'm not certain of the placement order myself.

Hope this helps you, and good luck with the project!

Scott

Attachments

Images (1)
  • 1

Here is an update. Some have asked for me to share the finished product, so here goes. This is for my granddaughter that loves trains and was born in 2018. This was a Major League Baseball engine/Polar Express/ Baby Berk. that I got cheap off of Ebay, someone had painted it heavy black and gold. I used brake fluid to strip the engine and tender and that worked extremely well. I was able to find the handrail stanchions with the help of S&W and The Train Tender. The lettering on the tender was different sizes to simulate printing by a child. I got pretty lucky in missing the rivets when applying the letters. I have also gotten all of the "Girls Set" reissued cars to make a set with the exception of the LV hopper. I think it turned out pretty good for my first attempt. Feel free to let me know what you think. If anyone has a box for this engine and tender that they don't want, I would be interested. I think that she will be able to have some fun with this, for Christmas.

Thanks,

Jeff

Attachments

Images (4)
  • 20201203_201739
  • 20201203_201521
  • 20201203_201403
  • 20201203_201703

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×