New to TMCC, hopefully an easy question.

FlyPlanes-PlayTrainsOGR Forum Member DIGITAL SUBSCRIBER

I’ve always been a conventional operating guy, but a gift from my wife (LionChief + GP9) has left me with an affinity for command.

I purchased a new in the box Cab-1/Base-1/Powermaster/SC-1 package for dirt cheap, and I’m about to wire it up. My question is about my yard, comprised or four spurs. I’m planning on isolating each spur by a fiber pin in the center rail of every turnout, and powered through an on/off switch to track voltage. I’m curious if the TMCC “halo” will have problems on these spurs, since the center rail is isolated.

Thanks...

Tom

6/5/195:15 PM

❤️ 0

Original Post

Replies sorted oldest to newest

E-UNIT-79OGR Forum Member

No. TMCC runs through the common or outside rails. You'll be fine

6/5/195:18 PM

❤️ 0

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

It's everywhere, it's everywhere, it's everywhere!

As he said, no sweat at all.

6/5/195:19 PM

❤️ 1

breezinupOGR Forum Member DIGITAL SUBSCRIBER

Nice CSi.

6/5/196:21 PM

❤️ 0

FlyPlanes-PlayTrainsOGR Forum Member DIGITAL SUBSCRIBER

breezinup posted:
Nice CSi.

Thank you!

It’s just a straight CS, no injection... but the triple Weber side drafts are dead sexy, and the roar they produce at full power gives me goosebumps every time I drive it