Hello, have a new-to-me EL PA diesel #6-18116. I think this is circa 1993. Pulled the shell off to inspect it & it has vertical can motors with no obvious lube points. I guess I need to remove the trucks to lube a gearbox,but removal of the machine screw (red marker) yields no release of the truck. Prying with a tongue depressor was no help.
What next ?
Thanks as always,
Rich
As I recall, you also need to remove the center rail pick up. To do that, you need to remove the shell (6 screws) and then turn the truck slightly so you can get the screw driver in from above the frame. The fun is in the reassembly, as you need to be certain that the wire lug attached to that screw does not hit the frame when the truck turns.
BTW, don't over tighten the shell screws! You will crack the mounting posts.
Chris
P&O
Access to this requires an OGR Forum Supporting Membership
